2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987 | 1986 | 1985 | 1984 | 1983 | 1982 | 1981 | 1980 | 1979 | 1978 | 1977 | 1976 | 1975 | 1974 | 1973 | 1972 | 1971 | 1970 | 1969 | 1968 | 1967 | 1966 | 1965 | 1964 | 1963 | 1962 | 1961 | 500 | 76 | 0
High-performance graphene-based carbon nanofiller/polymer composites for piezoresistive sensor applications
Authors: P Costa;J. Nunes-Pereira;J. Oliveira;Jaime Silva;J. Agostinho Moreira;S.A.C. Carabineiro;J.G. Buijnsters;S. Lanceros-Mendez
Ref.: Compos. Sci. Technol. 153, 241-252 (2017)
Abstract: Poly(vinylidene fluoride) (PVDF) composites with different carbonaceous nanofillers, prepared by solution casting, were studied their chemical, mechanical, electrical and electro-mechanical properties evaluated. Few-layer graphene (FLG) nanoplatelets (G-NPL), graphene oxide (GO) and reduced graphene oxide (rGO) and single-walled carbon nanohorns (SWCNH)) were found to have a strong influence in the overall properties of the composites prepared with up to 5 wt% nanofiller contents. The mechanical strain of carbonaceous nanofillers/PVDF composites decreases from 15% to near 5% of maximum strain. The electrical percolation threshold depends on the nanofiller type, being below 1 wt% for rGO and near 2 wt% for the remaining nanofillers. The electrical conductivity shows a maximum increase of nine orders of magnitude, from σ ≈ 5 × 10−11 S/m of pure PVDF to σ ≈ 1 × 10−2 S/m for rGO/PVDF composites with 5 wt% nanofillers. The conduction mechanism being related to hopping between the carbonaceous nanofillers for concentrations higher than the percolation threshold. Furthermore, the composites show electro-mechanical properties, except for G-NPL materials, with rGO/PVDF composites with 5 wt% nanofiller content showing higher Gauge factor (GF) values, reaching GF≈ 11 for deformations between 0.5 and 2 mm in 4-point bending experiments. These results demonstrate the suitability of the composites for strain sensing applications.
