2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987 | 1986 | 1985 | 1984 | 1983 | 1982 | 1981 | 1980 | 1979 | 1978 | 1977 | 1976 | 1975 | 1974 | 1973 | 1972 | 1971 | 1970 | 1969 | 1968 | 1967 | 1966 | 1965 | 1964 | 1963 | 1962 | 1961 | 500 | 76 | 0

Electrical properties of sol-gel derived MPB 0.37BiScO3-0.63PbTiO3 thin films on Iridium oxide electrode

Authors: Jingzhong Xiao, Aiying Wu, Paula M. Vilarinho, A. R. Ramos and E. Alves

Ref.: J. Mater. Chem. 19, 5572-5579 (2009)

Abstract: The characterization of sol–gel derived morphotropic phase boundary (MPB) 0.37BiScO3–0.63PbTiO3 (BSPT) thin films, deposited on IrO2/TiO2/SiO2/Si and Pt/TiO2/SiO2/Si substrates, was performed to identify the influence of the IrO2electrodes on the film`s microstructure and electrical properties. Though the ferroelectric behaviour of both films is similar, with remanent polarization values of 26 µC cm−2 and 23 µC cm−2, respectively, for IrO2 and Pt bottom electroded films, the leakage current density (JL) at room temperature markedly decreases from > 10−6 A cm−2 for BSPT on Pt to the order of ≤ 10−8 A cm−2 for BSPT on IrO2, under the maximum voltage of 4 V (∼80 kV cm−1). The formation of an interface layer between the film and the electrode, as observed by Rutherford Backscattering Spectroscopy, is proposed to have a space charge sink effect and, as a consequence, to account for the improvement of the leakage current behaviour of the IrO2 electroded films.

DOI: 10.1039/B900970A